"Night and Day" ~ Bead Embroidered Cuff Bracelet

My latest bead embroidered cuff bracelet presented a challenge.  Could I make something interesting out of only black and white beads without any color to sing out?  Color is the driving force behind all of my jewelry creations, so this limitation was new for me.   I'm calling this bracelet:

"Night and Day" 

click on any photo to enlarge view 

Although I like the combination of black and white, I prefer the more "vintage" appearance of ivory/cream/ecru shade of white instead of a stark, bright white. This project's goal was a more modern look.  I think the bracelet turned out very contemporary.

Below is the finished bead embroidered top piece - photographed flat so that it shows up better:

After the bead embroidered top piece is cut away from the bead backing (Black NBB by Nicole Campanella ~ the BEST backing on the market!), then this top is attached with glue to the brass cuff bracelet blank.

This is the top view of the cuff.  The beads are many varieties, sizes, shapes, and finishes of glass beads.  Although it may be difficult to see in the above photo (black is difficult for me to photograph), there are a total of four black Lucite flowers - each has a white beaded "stamen" in the middle.

This side view shows one of the two large, oval, striped beads.  The design of these two beads contributes to the modern look of the bracelet.

Finally, an end view of the cuff showing the inside black UltraSuede that finishes off the cuff with a soft fabric against the skin, as well as encases the inner brass cuff bracelet.  Around the edges I have sewn a picot edging, which is subtle so as not to take anything away from the focal beads.

* For more information on the BEST bead backing on the market, please visit:

www.Beadwright.com

"Canyon Creek" Bead Embroidered Cuff Bracelet

*Canyon Creek*

This latest bead embroidered cuff bracelet is called "Canyon Creek."  The Aqua Terra Jasper stones are currently my favorite gemstones ~ they have that water + land appearance, with swirling earth tones in blues, creams, tans, and rusts. 

Click any photo to enlage image.

Above I've shown the beaded top finished on the "Hawk Wing" color of Nicole's BeadBacking foundation.  I think it's easier to see the entire bracelet design when it's flat like this, since the curavture of the cuff bracelet allows you to see only small sections at a time.

In the photo above, I have cut away the backing foundation, and the beaded top part is ready to be glued to the brass blank cuff.  The central focal jasper stone is rectangular, but the two jasper stones on each side are not exactly the same - this lent a slightly free-form design to the bracelet.  It's always enjoyable to pull out the colors from the stones and let them flow where they will.

After I finished the cuff, I decided the central focal jasper cabochon might benefit from a circle of Aqua Terra jasper beads. 

This below photo shows the side view.  Besides the smaller Aqua Terra jasper beads, I placed six larger beads in the same coloration flat on the bracelet with a "stop bead" to hold them down.  I also had four glass flower beads that carried the same color theme.  The rust-colored beads are also glass, but with a matte finish.  Included are aqua crystals, and AB glass beads in several sizes and shapes.

 Inside is a soft, brown UltraSuede.  The edging on this cuff follows the bead choice on the bracelet itself - which is a different look for me, but one I am pleased with.  I even included some metallic cube beads for added interest.  







 

"Burnt Offering"

"Burnt Offering"

"Burnt Offering" is a bead embroidered pendant strung on a beaded necklace.  Oh, these colors are my favorite!  Especially this time of year as we approach Autumn. 

After making several bead embroidered cuff bracelets, I was amazed at how quickly this pendant came together. 

*Click on photo for enlarged view

Below is a closer view of the pendant.  I embroidered the stones onto Nicole's BeadBacking

(order yours by clicking here: http://nicolecampanella.com ) in her beautifully vibrant red color, which lent the piece a firey tone. 

The upper stone is Pyrite - it looks gold in this photo, but it's really more of a vintage silver look. 

The bottom stone is a cabochon that I ordered from India.  It came marked as:  "Natural Silver Spider Web Copper Coral Cushion," and indeed it does have a silver-toned spider web look to it.

In addition to the two gemstones, included are burnt orange cut crystals, two jasper "donut" beads, and various glass seed beads in matte and opaque - sizes 6, 8, 11, and 15 (around the bezel of the Pyrite stone). 

The beads in the necklace are called "Sponge Coral" and each one has a slightly different organic shape to it.

I made a toggle and loop for the closure, as I find this kind of beaded toggle closure ties in the whole design better than a store-bought "silver" metal toggle.  Besides - it's fun to make your own toggles.  You probably already have enough beads, and they make up very quickly. 

The back side of the bead embroidered pendant (not shown) is a very deep, cranberry-colored  UltraSuede fabric.



"IVORY COAST"

"Ivory Coast"

Everything I create gets a name, whether it's an original painting or a beaded bracelet.

This bead embroidered cuff bracelet I have named "Ivory Coast." 

The pearls and beads remind me of the color of shells I've found on the beach. 



* click on photos for larger image

Above is the bead embroidered work before it is attached to the brass inner cuff, and before it is finished off with the inside UltraSuede lining.  These bead embroidered bracelets are easier to see flat first, before they are shown circling a cuff bracelet.

This photo shows the finished cuff bracelet.  The center focal piece is a carved ivory rose cabochon that I encircled with jasper gemstones, glass seed beads, and glass pearls.  On the four "corners" are Lucite tulip flowers with pearl stamens. By each flower is a carved acrylic leaf.  The outer edging on the bracelet is finished with a lacey picot edge.

Besides the ivory rose and jasper beads, this bracelet also includes fresh water pearls, AB crystals, and assorted cream/ivory/ecru beads of various sizes and shapes.  I purposely chose only off-white beads, so no white beads are in the mix.  I think it turned out more elegant with only the cream-colored beads.  The foundation fabric onto which I beaded is a lovely warm tan shade, and the inside of the cuff is covered with ivory-colored UltraSuede in a faux tooled pattern.  The brass inner cuff is sandwiched between the top bead embroidered work and the UltraSuede to give the bracelet form and strength. The bead backing or foundation that I used is by Nicole Campanella (*see last paragraph) and the beautiful tan color is called "Hawk Wing."

I wanted this bracelet to have an old-fashioned vintage jewelry feel to it.  This was my favorite bead embroidered cuff bracelet to work on ... but then, I seem to think that with each one as I'm designing and working on them.  I'm actually a little sad when the bracelet is finally finished, but immediately I'm eager to start a new one.

*For those of you who are already enjoying your own bead embroidery projects, I must share my recent discovery for an exceptional bead backing (the foundation upon which the beads are sewn.)  It's called:  Nicole's BeadBacking (NBB).  This proprietary/copyrighted material is a most excellent surface for not only beadwork, but other sewing applications, and is fast becoming the go-to backing for bead embroidery artists - I know I am a forever fan. 

If you are interested in more information, please visit her Web site at:

www.NicoleCampanella.com or www.beadwright.etsy.com









"Peacock Landing" ~ Pyrite and Iris Bead Embroidered Cuff Bracelet

"Peacock Landing"

• Pyrite and Iris Bead Embroidered Cuff Bracelet

*click on all photos for larger view

The above photo shows the flat bead embroidered work before it is attached to the inner brass blank that gives the bracelet the rounded cuff form.  It's easier to see the whole bracelet design when it's photographed flat like this.

I have a fascination for the "iris" finish seed beads.  Iris beads feature an iridescence that showcases colors in purple, violet, blue, turquoise, green, and gold.  These beads are often sold together in a mixture, and sometimes one or another intense color predominates the mix.  The mix that I chose featured mostly violet/magenta beads. 

Pyrite is a mineral (iron pyrite/iron sulfide) with a metallic luster often referred to as "Fool's Gold" because of the pale, brass-yellow hue in the stone.  The pyrite beads I chose for this bracelet have more of a silver tone to them, although a flicker of gold can be seen in some of the rough nuggets called Rainbow Mystic Pyrite.

Below photo shows Rainbow Mystic Pyrite ~ rough iron Pyrite nuggets with a shimmer of colors similar to the iris beads.  The mineral Pyrite is coated with titanium, and then heat-treated to bring out the various lustrous and light-reflective colors.  I thought these Pyrite nuggets would make a great pairing with the colorful iris beads. 

Below is the finished bead embroidered cuff bracelet with a central Pyrite focal cabochon bead.

In addition to the several sizes and shapes of Pyrite (including Pyrite nail-head beads), and the iris beads, I have included gray pearls, glass magenta pearls, AB color-changing crystal beads, bugle beads, and silver-colored hematite beads.

The edges of the bracelet are embellished with size 15/0 iris beads in a picot design. 

The inside of the cuff is soft, black UltraSuede for comfort.

This has turned out to be my favorite bead embroidered cuff bracelet so far.  Possibly because I expected the Pyrite gemstones to lend a casual look to the final piece, but they surprised me by turning out much more elegant.  Still ... I'm not afraid to pair a bracelet like this with jeans.  I hope you are inspired by iridescence.   

"Royalty" ~ Bead Embroidered Bracelet

"Royalty"

This bead embroidered bracelet is named "Royalty" for the beautiful purples, lavenders, turquoise, and silver colors.  The design is purposely asymmetrical and freeform, with sections that incorporate a myriad of beads in various colors, textures, sizes, and shapes.  The largest cabochon stone is a lovely jasper with swirling purples - bezeled with rows of peyote stitching.  The randomly arranged and organically-shaped stones are dyed Howlite in shades of purple and turquoise.  Interspersed are silver beads with a silver toggle that echoes the square divisions in the bracelet.  The underside of the bracelet features a soft, teal-colored UltraSuede for comfort on the wrist.

*Click on photo for larger image.

"Singing The Blues" ~ Blue Agate Bead Embroidered Pendant and Necklace

"Singing The Blues"

Blue Agate Bead Embroidered Pendant and Necklace

The pendant began with a blue agate cabochon around which I have added bead embroidery using size 11 Capri blue glass seed beads, size 11 silver seed beads, and size 15 Capri blue glass seed beads.  One blue agate round bead is diagonally attached to the rectangular pendant along with seed beads on each side.  The bail is made with the Capri blue seed beads and the silver seed beads, and was purposefully made large enough to slip off the necklace for when the wearer wishes to enjoy only the necklace and not the pendant.  A Capri blue seed bead rests between each bead on the necklace for graceful movement, and the finding is a silver toggle that complements the silver beads.  The back of the pendant is covered with a soft, light tan UltraSuede fabric.